Chapter 4: Preparing for a job
4.7.3 Alignment
Use this function to adjust the print quality for best results.
Notes
The print quality of your printer is pre-adjusted when it is shipped. When the installation environment of the
printer or media type has been changed and print quality declines, use this alignment function.
To do the Alignment, follow the steps below.
Turn the power of the unit ON, and set the media.
Step 1 :
Perform an accuracy adjustment printing for alignment according to "TestPrinting".
Step 2 :
When performing uni-directional printing: Alignment (for the uni-direction printing)
When performing bi-directional printing: Alignment (for the bi-direction printing)
From "Head A" in the printing sample, select a number in which the straight line appears with the
Step 3 :
least blur.
Press either the [F2] key or [F4] key to select the number of the line you choose in the previous
Step 4 :
step.
Press the [Enter] key on the operation panel to register the setting value of "Head A".
Step 5 :
Repeat the steps from 3 to 5 to register all settings followed "Head A".
Step 6 :
AP-75036 - Revision 1.3 – 20/03/06
62
User's Guide CS9000 series