Setup Menu 4/7; Utility Menu; Errordisplay Menu - Oce CS9090 User Manual

5.4.4 Setup Menu 4/7

5.4.4.1

Utility menu

Perform various settings for application functions of products.
Setup items Parameters
Utility (1/2) ErrorDisplay
Media detection
Power on cleaning
Media width
Utility (2/2) Print and Wipe
SmartTop
Auto Cleaning
Cap Cycle
Utility (1/2 – 2/2) -
5.4.4.2

ErrorDisplay menu

To set display method to the operation panel when minor error occurred.
Setup items Parameters
ErrorDisplay <Off>
On
-
AP-75036 - Revision 1.3 – 20/03/06
Description
To set display method to the operation panel when minor error
occurred.
When media has been initialized, to perform detection of width
and front edge of the media.
Cleaning should be performed automatically when the power is
turned on.
If media detection is not performed for initial media, to set the
width of the media in the tray.
To wipe while printing, to take care of possible condensation on
the print head nozzle plate.
The ideal temperature of the media is near to the preheater. This
area of paper is fed before a print starts to obtain perfect quality.
Performs cleaning cycle while printer is idle at the set
temperature.
To perform auto tubing flush when printer is idle.
• [CANCEL] key: To shift to the previous hierarchy menu.
Description
No ErrorDisplay.
To perform ErrorDisplay.
To shift to the previous hierarchy menu.
109
Chapter 5: Handling the printer
User's Guide CS9000 series