Oce CS9090 User Manual page 73

Remove the smartchip card after the transfer of the ink value and press enter (see image
Step 5 :
below)
The system now goes back to the ChipStatus menu
B. Scanning the cassette slots
This action is performed when there is no valid ink card in the ink manager system's reader.
Notes
In case there are 8 valid NOT empty smartchips installed on the printer, this procedure should be repeated
8 times.
IF there is ...
ink value on one of the cassette cards
no ink value on any of the cassette cards
AP-75036 - Revision 1.3 – 20/03/06
THEN ...
- the procedure as from now is the same as when a
valid smartchip card has been found. (See display
below )
- press ENTER or CANCEL
- the following message appears :
- press enter to exit
73
Chapter 4: Preparing for a job
User's Guide CS9000 series