Long Store Menu - Oce CS9090 User Manual

Chapter 5: Handling the printer
5.4.5.6

Long Store Menu

When storing the printer for longer than 5 days, ink cassettes with IJC910 Low Solvent Cleaning liquid
should be installed. For more details, please refer to maintenance cycle.
Setup items Parameters
Long Store No
Yes
-
The process consists of several cleaning loadings, several air loadings and one ink loading. On the display
of the operation panel a time indication is mentioned on the fourth line.
Message
1. Please remove cart.
2. Ink Discharge
3. Please insert Cleaning cart.
4. During washing wait for a while
5. Ink not filled [ALL]
6. Power OFF
Notes
When a cleaning cassettes is empty during LongStore procedure, remove the empty one and replace it by a
new one. Only the last cycle will be repeated. Although, the full time (29 minutes) is mentioned again on the
panel.
After powering OFF the machine, the tubings in the waste bottle should be mounted on the nipple plate at
the bottom of the machine. This to prevent air is coming in the ink system which will dry out the heads.
How to load ink after a long store procedure?
Message
1. Power ON without Ink Cassettes installed.
2. Insert Cartridges
3. Auto InkFill
Notes
When powering ON and INK cassettes are already installed, the message "Not Original Ink" will be
displayed. Remove 1 and reinsert it, then the procedure will continue.
AP-75036 - Revision 1.3 – 20/03/06
Description
Do not perform a long store
Perform the long store procedure.
• [CANCEL] key: shift to the previous hierarchy menu.
Time 65"
1 Nipple plate
Time 65"
124
Time 90"
29 29
Time 90"
9 13
User's Guide CS9000 series