Head Cleaning - Oce CS9090 User Manual

7.5.3 Head cleaning

If printouts become faint or partially missed, perform head cleaning to clean the surface of the head and the
nozzles.
Follow the steps below to perform head cleaning.
Notes
Remove media before performing head cleaning.
If you perform head cleaning with media installed, the head may contact the media.
Make sure that the state of the product is normal.
Step 1 :
Caution
Be sure not to pinch your fingers while opening and closing the front cover.
Refer to "TestPrinting" to perform nozzle check printing.
Step 2 :
Check if the print head, referring to the diagram below.
Step 3 :
Check the printer is in the normal status.
Step 4 :
Press the [F2] key on the operation panel.
Step 5 :
The printer enters the cleaning menu.
I)
AP-75036 - Revision 1.3 – 20/03/06 169
Chapter 7: Maintenance
User's Guide CS9000 series