Oce CS9090 User Manual page 84

Chapter 5: Handling the printer
Setup items
Setup menu (1/7)
Setup menu (2/7)
Setup menu (3/7)
Setup menu (4/7)
Setup menu (5/7)
Setup menu (6/7)
Setup menu (7/7)
Setup menu (1/7-7/7)
Notes
By using the software server RIP (option), some setups for printing can be set by the RIP. For details, refer
to the operation manual of the products.
AP-75036 - Revision 1.3 – 20/03/06
Parameters Description
Displays the information (ink status) for each ink cassette
Ink status
installed in the ink cassette slot.
Origin setting Sets the printing start position (origin) for printing data.
Test print Performs test printing.
Media setting Makes various media settings.
Print mode setting Makes various print mode settings.
Command setting Makes various printer command settings.
Layout setting Makes various layout function settings.
Function setting Makes various processing printing data settings.
Roll setting Makes various roll media settings.
Centronics setting Sets Centronics Interface communication mode.
Network setting Makes the settings for the network interface.
Utility setting Makes various advanced function settings.
Makes various settings for the processing method of the
File management
printing data sent from computer to the installed hard disk in
setting
the printer.
Initialize setting Returns the parameters to factory default value.
The dump printing for the online feature check will be
Data dump
performed.
Ink Manager Perform 'HeadWash', 'InkChange' or 'InkLoad'.
Head Unlock The cutting blade is replaced.
Wiper clean Clean the wiper.
Tank change Tank is replaced.
Tubing Flush Makes various tubing flush settings
Version Check Ability to view the installed firmware version.
[CANCEL] key: Cancel the setup menu, and shift to the
-
normal condition.
84 User's Guide CS9000 series