Oce CS9090 User Manual page 134

Chapter 5: Handling the printer
1.1.1.4 2) Cleaning
While printing, it could be possible that some nozzles drop out, in that case, perform a little, normal or
powerful cleaning.
Please follow the steps below to perform a cleaning.
When there are some missing nozzles, a cleaning should be done. Depending on the quantity of missing
nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.
Press the [F2] key of the operation panel.
Step 1 :
To shift to the cleaning menu.
I)
Press the [F1] key or the [F2] key on the operation panel.
Step 2 :
The product will perform following operations:
I)
Setup items Key name
Cut & Feed F1
F2
Press the [ENTER] key to start the requested cleaning.
Step 3 :
1.1.1.5 3) Adjust heaters
While printing, the heater values can be changed. For example: when noticing cockling.
Please follow the steps below to adjust the heater temperatures.
Press the [F3] button
Step 1 :
Following screen will be displayed
Step 2 :
Change the value of one or more heaters or turn them all off.
Step 3 :
Notes
For more details about heater adjustment, please refer to "Controlling the heater elements on the CS 9000
printer"
AP-75036 - Revision 1.3 – 20/03/06
Parameters
ALL, Head 1 – Head 2
Little, normal, powerful
134
Description
Clean ALL heads or head couple one or two
Set the intensity of a cleaning
User's Guide CS9000 series