Installing The Stand - Oce CS9090 User Manual

3.3.2 Installing the stand

Install the stand to the main unit according to the following procedure :
Place the stand with its feet on the floor.
Step 1 :
Lift up the main unit with at least four persons by holding it by the handles.
Step 2 :
Place the main unit on the stand.
Step 3 :
Attach the hexagon socket head cap screws (M6 x 16: 8) to the stand.
Step 4 :
Tighten the hexagon socket head cap screws to install the stand using the assembly tool.
Step 5 :
AP-75036 - Revision 1.3 – 20/03/06
Stand
1
Main unit
2
Handle
3
Hexagon socket head cap screw (M6 x 16)
1
Stand
2
Main unit
3
33
Chapter 3: Setting up the unit
User's Guide CS9000 series