Overwrite Menu; Halftone Menu; Layout Setup Menu - Oce CS9090 User Manual

5.4.2.17 Overwrite menu

Set the printing method for areas where figures overlap on the printing data.
Setup items Parameters
Overwrite <Last>
Mix
-

5.4.2.18 Halftone menu

To set the screening method. When creating prints of MH-GL/GL2 (vector) data and RTL-PASS (raster) data
that has not been converted into binary,
Setup items Parameters
Halftone <Speed>
Quality
Thin
-

5.4.2.19 Layout setup menu

Make various settings on layout function.
Notes
The layout function automatically determines the size of printing data sent from the computer, and then
determines the amount of roll media required without wasting media.
If sheet media has been loaded, the layout function is disabled.
Setup items Parameters
Layout Direct
Joint
CtPos
-
AP-75036 - Revision 1.3 – 20/03/06
Description
The colour of the print created afterward is given priority.
The colours of overlapping areas are mixed and printed.
To shift to the previous hierarchy menu.
Description
To use the error diffusion matrix to perform rapid screening.
High quality screening is performed according to the method of minimal
average error.
When printing data created for a competitor's printer, make this setting
if the "Speed" setting could result in dark prints.
To shift to the previous hierarchy menu.
Description
To set the layout method for printing data.
Makes settings for stitching print.
To set the media cutting position after printing has been completed.
[CANCEL] key: To shift to the previous hierarchy menu.
101
Chapter 5: Handling the printer
User's Guide CS9000 series