5.4 MENU SETUP ON THE OPERATION PANEL
This section describes how to set the Menu settings on the operation panel, and setup items.
Follow the steps below to set the Menu settings.
Make sure that the operation panel is normal.
Step 1 :
Press the [MENU ▲] or [MENU ▼] key.
Step 2 :
The screen shows following Menu.
I)
Notes
The Network Settings menu is displayed if the network interface board has been installed on the product.
The items on the File Management menu are displayed if a hard disk has been installed in the product.
AP-75036 - Revision 1.3 – 20/03/06
83
Chapter 5: Handling the printer
User's Guide CS9000 series