Head Cleaning - Oce Eco Solvent CS9350 Manual

6.2.3

Head cleaning

If printed data is blurred or lacks part of it, clean the print head surface and nozzle (Head cleaning).
NOTE
When not using the printer for a long period (one week or more), perform Head cleaning

once a week. If not performing Head cleaning, the print head is clogged. Doing so will
preserve print quality.
Remove media when cleaning. Cleaning with media loaded may lead to contact between

the print head and media.
Step 1:
Confirm that the operation panel is Normal and the media loading lever is lowered.
Step 2: Press the [>] key on the operation panel to select the cleaning mode.
Step 3: Press the [Cleaning] key on the operation panel for at least two seconds.
Start Head cleaning.

"Cleaning **%" is displayed on the operation panel.

After Head cleaning is complete, the operation panel shifts to Normal.

NOTE
If you fail to remove blurs or incompleteness of printing in one Head cleaning, perform

strong cleaning.
If blurs or lacking parts in printed media do not disappear with several times of Head

cleaning, refer to "7 Troubleshooting", and take appropriate measures.
6-158
CS9350 User's Guide