Step 2 - Retrieve Your Netgear's Lan And Wan Configuration - NETGEAR FVS124G Configuration Manual

Step 2 – Retrieve your NETGEAR's LAN and WAN Configuration
(*) If you are using a subnet mask with elements that are not 0 or 255, you can
use one of the many subnet calculators available for free on the Internet to
calculate the network address.
00:00:00
➎
➏
➍
2
1
00:00:00
11
‣ Go to Maintenance > Router Status and obtain the
following information from the Router Status page:
‣ WAN1 Configuration:
‣ Write down the WAN IP Address
‣ If you use Dynamic DNS for your device, or if it has a
DNS host name, write down the host name instead
‣ LAN Port:
‣ Write down the LAN IP Address
‣ Write down the LAN IP Subnet Mask
‣ Calculate your LAN Network Address by applying the LAN
➏ to the LAN IP Address ➎:
Subnet Mask
‣ Applying the subnet mask means setting those elements of
the IP address to 0 where the subnet mask is 0, and
preserving all elements where the subnet mask is 255 (*)
‣ In our example:
LAN Subnet Mask 255
applied to
LAN IP Address 192
LAN Network Address 192
‣ Write down the LAN Network Address you have
➐
calculated as
➍
➎
➏
. 255 . 255 . 0
. 168 . 13 . 1
. . .
168 13 0