Table C-25. System Logs: VPN Log Messages, Port Forwarding, WAN Host and Interface
Message
Explanation
Recommended Action None
Table C-26. System Logs: VPN Log Messages, Port Forwarding, LAN Host and Interface
Message
Explanation
Recommended Action None
Traffic Meter Logs
Table C-27. System Logs: Traffic Meter
Message
Explanation
Recommended Action To start the traffic, restart the traffic limit counter.
System Logs and Error Messages
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
2000 Jan 1 01:30:08 [SRX5308] [portforwarding]
id=SRX5308 time="2000-1-1 1:30: 8" fw=20.0.0.2 pri=6 rule=access-policy
proto="Port Forwarding" src=20.0.0.1 user=sai dst=20.0.0.2 arg="" op="" result=""
rcvd="" msg="Port Forwarding"
A SSL VPN tunnel through port forwarding is established for ID SRX5308 with the
WAN host 20.0.0.1 through WAN interface 20.0.0.2 and logged in with the
username "sai."
2000 Jan 1 01:35:41 [SRX5308] [portforwarding]
id=SRX5308 time="2000-1-1 1:35:41" fw=192.168.11.1 pri=6 rule=access-policy
proto="Virtual Transport (Java)" src=192.168.11.2 user=sai dst=192.168.11.1
arg="" op="" result="" rcvd="" msg="Virtual Transport (Java)"
A SSL VPN tunnel through port forwarding is established for ID SRX5308 from the
LAN host 192.168.11.2 with interface 192.168.11.1 and logged in with the
username "sai."
Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10 MB
has reached for WAN1._
Traffic limit to WAN1 that was set as 10 Mb has been reached.
This stops all the incoming and outgoing traffic, that is, if you selected the Block All
Traffic radio button in the When Limit is Reached section on the WAN TrafficMeter
screen.
v1.0, April 2010
C-17