Setting The System Time - NETGEAR STM150 Reference Manual

Setting the System Time

Setting the correct system time and time zone ensures that the date and time recorded in the
STM150 logs are accurate. Changing the time zone requires the STM150 to reboot to apply the
updated settings.
To set the system time
1. On the menu, click Administration > Time Zone.
Figure 3-4
2. You can use either the default NTP server or a custom NTP server. Set the system time either
by:
• Using a Network Time Protocol (NTP) server. A list of public NTP server is available at
http://ntp.isc.org/bin/view/Servers/WebHome
• Manually entering the date and time
3. In Time Zone, select the time zone for the country where the STM150 is installed.
4. Click Apply. If the time zone has changed, a reboot confirmation will appear.
Performing System Management Tasks
ProSecure Web/Email Threat Manager STM150 Reference Manual
v1.0, January 2009
.
3-5