Viewing And Disconnecting Active Users - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

Table 9-5 explains the fields of the VLAN Status screen.
Table 9-6. VLAN Status Screen Fields
Setting
Profile Name
VLAN ID
MAC Address
Subnet IP
DHCP Status
Port Membership

Viewing and Disconnecting Active Users

The Active Users screen displays a list of administrators, IPsec VPN, and SSL VPN users that are
currently logged in to the VPN firewall.
To display the list of active VPN users:
Select Monitoring > Active Users from the main menu. The Active Users screen displays.
Figure 9-8
Monitoring System Access and Performance
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Description (or Subfield and Description)
The unique name for the VLAN that you have assigned on the Add VLAN Profile
screen (see "Configuring a VLAN Profile" on page
The identifier for the VLAN that you have assigned on the Add VLAN Profile
screen (see "Configuring a VLAN Profile" on page
VLANs can have the same MAC address as the associated LAN port or can be
assigned a unique MAC address, depending on the selection that you have
made on the LAN Advanced screen (see
and LAN Advanced Settings" on page
disabled, the MAC address displays as 00:00:00:00:00:00.
The IP address and subnet mask that you have assigned on the Add VLAN
Profile screen (see "Configuring a VLAN Profile" on page
The DHCP status for the VLAN, which can be either DHCP Enabled or DHCP
Disabled, depending on the DHCP configuration that you have specified on the
Add VLAN Profile screen (see
The ports that you have associated with the VLAN on the Add VLAN Profile
screen (see "Configuring a VLAN Profile" on page
v1.0, April 2010
3-6).
3-6).
"Configuring VLAN MAC Addresses
3-11). If a VLAN is configured but
"Configuring a VLAN Profile" on page
3-6).
3-6).
3-6).
9-17