View The Active Pptp Users - NETGEAR ProSAFE SRX5308 Reference Manual

Table 66. PPTP Server screen settings (continued)
Setting
Encryption
If the authentication is MSCHAP or MSCHAPv2, the PPTP server can support Microsoft Point-to-Point
Encryption (MPPE). Select one or more of the following types of MPPE:
• MPPE-40. MPPE 40-bit encryption.
• MPPE-128. MPPE 128-bit encryption. This is the most secure type of MPPE encryption.
• MPPE-stateful. Stateful MPPE encryption. This is the least secure type of MPPE encryption.
3. Click Apply to save your settings.

View the Active PPTP Users


To view the active PPTP tunnel users:
Select Monitoring > Active Users & VPNs > PPTP Active Users. The PPTP Active Users
screen displays. (The following figure does not show any active users.)
Figure 180.
The List of PPTP Active Users table lists each active connection with the information that is
described in the following table.
Table 67. PPTP Active Users screen information
Item
Username
Remote IP
PPTP IP
Action
The default poll interval is 5 seconds. To change the poll interval period, enter a new value in
the Poll Interval field, and click the Set Interval button. To stop polling, click the Stop button.
Virtual Private Networking Using IPSec and L2TP Connections
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
Description
The name of the PPTP user that you have defined (see
page 310).
The remote client's IP address.
The IP address that is assigned by the PPTP server on the VPN firewall.
Click the Disconnect table button to terminate the connection. (This button is displayed
only when there an active connection.)
271
Configure User Accounts on