Configure Other Firewall Features; Attack Checks - NETGEAR ProSAFE SRX5308 Reference Manual

Configure Other Firewall Features

•

Attack Checks

• Set Limits for IPv4 Sessions
• Configure Multicast Pass-Through for IPv4 Traffic
• Manage the Application Level Gateway for SIP Sessions
You can configure attack checks, set session limits, configure multicast pass-through, and
manage the application level gateway (ALG) for SIP sessions.
Attack Checks
The Attack Checks screen allows you to specify whether the VPN firewall should be
protected against common attacks in the DMZ, LAN, and WAN networks. The various types
of IPv4 attack checks are listed on the Attack Checks screen and defined in
page 171. For IPv6, the only options are to specify whether to allow a ping on the WAN port
and whether to allow VPN pass-through for IPSec.
IPv4 Attack Checks

To enable IPv4 attack checks for your network environment:
1. Select Security > Firewall > Attack Checks. In the upper right of the screen, the IPv4
radio button is selected by default. The Attack Checks screen displays the IPv4 settings:
Figure 100.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Firewall Protection
170
Table 35 on