Configuring Other Firewall Features; Attack Checks - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Figure 4-15
Configuring Other Firewall Features
You can configure attack checks, set session limits, and manage the application level gateway
(ALG) for Session Initiation Protocol (SIP) sessions.
Attack Checks
The Attack Checks screen allows you to specify whether or not the VPN firewall should be
protected against common attacks in the DMZ, LAN, and WAN networks. The various types of
attack checks are listed on the Attack Checks screen and defined in
Table 4-4 on page
4-27.
To enable the appropriate attack checks for your network environment:
1. Select Security > Firewall from the menu. The Firewall submenu tabs display.
2. Click the Attack Checks submenu tab. The Attack Checks screen displays (see
Figure 4-16
on page
4-27).
4-26
Firewall Protection
v1.0, April 2010
Advertisement
Table of Contents
Troubleshooting
