The Following Is An Example Of Correctly Configured Ip Addresses; Primary Wan1 Ip Address: 10.0.0.1 With Subnet; Dmz Ip Address: 192.168.10.1 With Subnet; Primary Lan Ip Address. 192.168.1.1 With Subnet 255.255.255.0 - NETGEAR ProSAFE SRX5308 Reference Manual

The following is an example of correctly configured IPv4 addresses:
• WAN IP address. 10.0.0.1 with subnet 255.0.0.0
• DMZ IP address. 176.16.2.1 with subnet 255.255.255.0
•

Primary LAN IP address. 192.168.1.1 with subnet 255.255.255.0

• Secondary LAN IP address. 192.168.20.1 with subnet 255.255.255.0

To add a secondary LAN IPv4 address:
1. Select Network Configuration > LAN Settings > LAN Multi-homing. In the upper
right of the screen, the IPv4 radio button is selected by default. The LAN Multi-homing
screen displays the IPv4 settings. (The following figure contains one example.)
Figure 54.
The Available Secondary LAN IPs table displays the secondary LAN IP addresses added
to the VPN firewall.
2. In the Add Secondary LAN IP Address section of the screen, enter the following settings:
• IP Address. Enter the secondary address that you want to assign to the LAN ports.
• Subnet Mask. Enter the subnet mask for the secondary IP address.
3. Click the Add table button in the rightmost column to add the secondary IP address to the
Available Secondary LAN IPs table.
Repeat Step 2
Available Secondary LAN IPs table.
Note: Secondary IP addresses cannot be configured in the DHCP server.
The hosts on the secondary subnets need to be manually configured
with the IP addresses, gateway IP address, and DNS server IP
addresses.

To edit a secondary LAN IP address:
1. On the LAN Multi-homing screen for IPv4 (see the previous figure), click the Edit button
in the Action column for the secondary IP address that you want to modify. The Edit
LAN Multi-homing screen displays.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
and Step 3 for each secondary IP address that you want to add to the
LAN Configuration
95