Table of Contents
Advertisement
Console (config)# radius-server host 192.168.10.1 auth-port 20 timeout 20
5.18.2 radius-server key
The radius-server key global configuration command sets the authentication and encryption key for all
RADIUS communications between the router and the RADIUS daemon. To reset to the default, use the
no form of this command.
Syntax
radius-server key [key-string]
no radius-server key
key-string — Specifies the authentication and encryption key for all RADIUS communications
between the router and the RADIUS server. This key must match the encryption used on the
RADIUS daemon. The key can be up to 128 characters long.
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the authentication and encryption key for all RADIUS communications
between the
device and the RADIUS daemon to "abc-server".
Console (config)# radius-server key abc-server
5.18.3 radius-server retransmit
The radius-server retransmit global configuration command specifies the number of times the software
searches the list of RADIUS server hosts. To reset the default configuration, use the no form of this
command.
Advertisement
Table of Contents
