10. PRINTER MODE
10. PRINTER MODE
10.1 PRINTER MODE function tree
• With the main screen displayed, press the
screen.
TONER REMAINING
T/C CHANGE
10.2 TONER REMAINING
Function
• Displays the amount of toner of each color still available for use.
Use
• For maintenance control of toner cartridges.
1. Select [PRINTER MODE] → [TONER REMAINIG] and press the Select key to display
Setting/
[TONER REMAINING] screen.
procedure
• Pressing the Stop/Reset key will cause the main screen to reappear.
10.3 T/C CHANGE
10.3.1
REPLACE MODE
Function
• Moves the specified color of toner cartridge into replacement position, so it can be
replaced.
Use
• To replace the specified color of toner cartridge.
1. Select [PRINTER MODE] → [T/C CHANGE] → [REPLACE MODE] and the specific
Setting
/procedure
color of toner to be replaced.
2. Press the Select key.
3. The rack rotates to bring the specified color of toner cartridge to the replacement
position. When the rack stops moving, the message [REPLACE MODE CHANGE X
TONER] appears on the display.
4. Open the front cover and replace the toner cartridge.
5. Close the front cover. The initial screen will then reappear.
74
key to display the [PRINTER MODE]
PRINTER MODE
REPLACE MODE
EJECT MODE
P/H CLEAN MODE
Field Service Ver. 1.0 Nov. 2008
Y TONER
M TONER
C TONER
K TONER
Ref.
page
P.74
P.74
P.75
P.75