30 April, '89
7. Duplex Side Plate Drive Wire Replacement
1.
Remove the duplex tray. (Refer to
2.
Place the duplex unit upside down.
3.
Remove the tension spring [A].
4.
Remove the old drive wire [B].
5.
Wrap the new wire around the drive pulley [C] 1.5 times as shown.
6.
Insert the beads [D] of the drive wire in the duplex side plate bracket
[E]
7.
Hook the tension spring to the eyelets of the drive wire.
"Duplex Tray Removal.")
5-72