Table of Contents
Advertisement
6. Duplex Paper Sensor Adjustment
Open the front doors and pull the duplex tray all the way out. Leave
1.
the duplex handle in the vertical position.
2.
Remove the duplex tray handle (1 screw) and the duplex tray cover (2
screws).
3.
Open the duplex tray top covers.
4.
Loosen the allen screw securing the duplex paper sensor actuator [A].
5.
Raise the duplex paper sensor feeler [B] until it touches the bottom
plate. (Make sure that the bottom plate is in the upper position.)
6.
Position the duplex paper sensor actuator so that the end of the ac-
tuator is flush with the bottom of the duplex paper sensor [C].
7.
Tighten the allen screw.
8.
Set
sheet of paper [D] at the correct paper feed position and check
a
that the duplex sensor actuator is out of the sensor.
5-71
30 April, '89
Advertisement
Chapters
Table of Contents
