Vertical Transport Unit Removal - Ricoh FT7770 Service Manual

7. Vertical Transport Unit Removal

a) Duplex tray (Refer to "Duplex Tray Removal".)
b) Vertical transport cover (1 screw)
c) Upper and lower trays (Refer to "Paper Tray Unit Removal".)
d) Drum guide [A] and drum guide holder [B] (1 screw)
e) Harness cover [C] (1 screw), ozone fan cover [D] (1 screw), ozone fan
with bracket [E] (1 screw and 1 connector).
2.
Remove the lower rear cover (2 screws).
3.
Remove the upper tray connector bracket [F] from the vertical transport
unit (2 screws) and remove the connector from the bracket.
5.
Pull out the vertical transport unit [G] (2 screws).
NOTE: When installing the vertical transport unit, make sure that it is mounted
on the upper and lower rails [H] and that the 2 front and 2 rear locating
pins are aligned.
5-65
30 April, '89