30
April, '89
5. Gripper Solenoid Adjustment
ADJUSTMENT STANDARD: 3+0.5, -0.0 mm (0.11"+0.02", -0.00")
1.
Remove the gripper assembly.
2.
Manually rotate the timing belt [A] to move the grippers [B] forward.
3.
Manually close the grippers [C] and confirm if the gap [D] is within
the adjustment standard.
(2 screws [F]).
(Refer to "Gripper Assembly Removal".)
If not, ajust the position of the solenoid [E]
11-40