Transport Unit Cover Removal - Ricoh FT7770 Service Manual

Transport Unit
4.
Open the inverter unit cover [A],
1.
2. Remove the screw securing the inverter unit cover brace wire
Then, push the rear pin [C] towards the back of the machine,
remove the inverter unit cover.
3. Remove the transport unit upper cover [D] (4 screws).
4. Raise the transport unit and remove four screws securing the lower
cover [E].
5. Lower the transport unit.
lifting the rear of the transport unit in the direction of the arrow [F].
Cover Removal
[A]
Remove the lower cover (2 screws) while
7-43
30
April, '89
[B]
and