Hot Roller Stripper Replacement - Ricoh FT7770 Service Manual

2. Hot Roller Stripper Replacement

1. Remove the fusing unit knob
fusing unit cover [B] (3 screws).
2. Slide the fusing unit all the way out and open the inverter unit [C].
3. Unhook the two left cover springs (front and rear) [D], and remove the
left cover [E].
4. Remove the stripper pawl lock plate [F] (2 screws). (Be careful not to
stretch the stripper pawl springs.)
5. Unhook the stripper pawl springs, slide the stripper
cutout on the end of the shaft and remove them.
reverse threaded screw) and the
[A] (1
5-43
30
April, '89
pawls [G] to the