Tray Lock And Positioning - Ricoh FT7770 Service Manual

30
April, '89
Lock and Positioning
Tray
8.
When the tray starts moving up, the lock lever drops behind the lock plate
on the accuride support bracket, locking the tray in position to prevent the
tray from being pulled out while in the up position.
When the tray moves to the down position, the bottom plate of the tray
pushes down a pin on the lock lever.
moves up, allowing the tray to be pulled out.
When the tray is
detent plate, thus
front right side of
set, the roller of the detent arm presses against
positioning the tray.
the tray and determines the side registration.
(Front View)
The opposite end of the lever then
The tray stopper is fixed to
2-68
the
the