Installation Procedure - Ricoh FT7770 Service Manual

2. Installation Procedure

Turn off the main switch of the copier,
1.
[A] (2 screws).
the main PCB, and reinstall the lower left cover.
Remove the lower rear cover (2 screws) and the cover plate [C] (2 screws).
2.
Remove the cord stopper [D] from the cover plate.
3. As shown in the figure, install the cord stopper on the harness leading
from the menu reader and secure the stopper [E] on the cover plate with
pliers.
Then, connect the 10P free connector [B] to CN217 on
and remove the lower left cover
12-9
30 April, '89