Ricoh FT7770 Service Manual page 451

- Docking (First Sorter & Copier) -
Connect the fiber optics cables [A] to the copier. (The cable with the
1.
brown making should be installed on the rear terminal.)
2. Dock the first sorter with the copier. Make sure that the docking pin
[B] is seated firmly in the notch on the copier.
Install the leveling shoes [C] under the first sorter and the sorter
3.
connector unit.
unit by securing the feet [D] up or down.
between the copier and the first sorter (2 screws).
Then, level the first sorter and the sorter connector
10-11
Install the fixing bracket
30 April, '89