Top Plate Removal - Ricoh FT7770 Service Manual

30 April, '89

2. Top Plate Removal

1. Remove the DF transport unit and feed-in unit. (Refer to "DF Removal"
in Section 5.)
Remove the following parts:
2.
a) Right top cover (2 screws)
b) Original tray
c) Upper front cover (2 screws)
Remove the platen cover support bracket [A] (2 flat-head screws and 2
3.
pan-head screws).
Remove the operation panel [B] (5 connectors and 5 screws).
4.
Remove the scanner home position sensor bracket
5.
Remove the top plate [D] (6 screws, 115 V machines--1 connector).
6.
screws)
(2
5-2
(1 screw).
[C]