Ricoh FT7770 Service Manual page 454

30 April, '89
- Docking (Second sorter and Sorter connector unit) -
1. Dock the second sorter [A] with the sorter connector unit [B] (2 docking
pins).
2. Place the foot shoes [C] under the second sorter
screw down the feet to level the second sorter.
3. Loosen the three screws [E] and install the front
[F] .
4. Reinstall the upper and lower rear covers [G].
Install the rear fixing bracket [H] (1 screw) while pushing it down.
5.
Connect the one the ground wire ends to the second sorter power supply
6.
bracket [I] and the other end to that of the first sorter [J].
7. Stick the caution decals [K] beside the sorter connector unit and copier
power supply brackets.
8. Stick the first and second sorter misfeed decals [L] under the lowest
decals [M] inside the front doors.
10-14
leveling feet [D], and
side sorter shield