Ricoh FT7770 Service Manual page 449

4. Remove the bin number bracket [A] (2 screws, 2 ground screws), the
distribution unit support bracket [B] (7 screws), and the base plate
cover, [C] (3 screws).
5. Replace the locking bracket [E] with the front fixing bracket [F] (4
(Do not clamp the ground wire with the front fixing bracket.)
screws).
6. Reinstall the bin number bracket and the distribution unit support
bracket. Use the docking pin [G] to fix the support bracket instead
of the front side screw.
7. Turn on DIP SW101-1 on
Screw down the leveling
8.
base plate.
with the first sorter.)
the first sorter main PCB [H].
feet so that the heads [I] are flush with the
it easier to dock the sorter connector unit
(This makes
10-9
30 April, '89