Ricoh FT7770 Service Manual page 596

1 August 1990
7. Replace the shoulder screw [A] with the docking pin [B] which comes in
the accessory box. Remove the front shoulder screw.
8. Remove the lowest two bins from the sorter/stapler.
9. Manually move the jogger unit [C] to the left.
10. Remove the grounding terminal [D] from the jogger shaft, and fix the
terminal onto the jogger cam bracket [E].
11. Manually move the jogger unit back to its home position.
12. Connect the sorter/stapler to the copier (2 docking pins and fiber optics
cable).
13. Fix the sorter/stapler to the copier with the fixing bracket (2 screws).
14-8