Table of Contents
Advertisement
30 April, '89
Turn Roller Replacement
7.
1.
Remove the transport unit covers.
Removal.")
2.
Release the inverter motor assembly [A] from the turn roller assembly (6
screws and 6 bushings).
3*
Remove the inverter lower exit guide (2 screws).
4.
Remove the front bearing [B] (1 E-ring).
5.
Push the turn roller assembly [C] to the rear and release the guide [D].
6.
Remove the turn rollers [E] (1 E-ring and 7 pins).
drive pins. )
I
(Refer to "Transport Unit Cover
7-46
(Do not lose
the
Advertisement
Chapters
Table of Contents
