Table of Contents
Advertisement
2. Staple Positioning Adjustment
ADJUSTMENT STANDARD: 5±2 mm (0.2"±0.08") [A] from the top-left corner of
1.
Perform steps 1 through 5 in "Stapler Removal".
- Front and Rear Adjustment -
2.
Loosen the two screws [B], and adjust the stapler position.
- Right and Left Adjustment -
3.
Loosen the three screws [C], and adjust the stapler position.
the paper.
11-37
30 April, '89
Advertisement
Chapters
Table of Contents
