Transport And Inversion Unit; Original Transport - Ricoh FT7770 Service Manual

TRANSPORT AND INVERSION UNIT

1. Original Transport

The transport belt takes over original transport from the feed-in unit and
moves the original to the proper position on the exposure glass for copying.
The belt motor turns on when the one-turn sensor of the feed-in unit is ac-
tivated.
Soon after the original passes over the original scale, the belt
motor reverses its direction of rotation and drives the original back against
the right scale.
original skew by aligning the original against the scale.
After the original is positioned on the
receives the feed-out signal from the copier. Upon receiving this signal, the
belt motor turns on, and the transport belt feeds the original to the pull-out
rollers.
Shortly after that, the motor de-energizes. This corrects
exposure glass, the DF waits until it
7-17
30 April, '89