Table of Contents
Advertisement
30
April, '89
4. Rear Wire Replacement
a.
Remove the old wire.
b.
Insert the blue end bead
drive pulley and wrap
(counterclockwise).
c.
String the wire over all the pulleys, except the idle pulley
shown.
d.
Wrap the other end of the wire around the drive pulley 2.5 times
counterclockwise and insert the bead into the drive pulley slot as
shown.
e.
Insert the support beads into the slots of the lift rods.
f.
Now, string the wire over the idle pulley.
[A] of the new
the wire twice
8-24
wire into the slot
around the drive
of the
pulley
[B], as
Advertisement
Chapters
Table of Contents
