Ricoh FT7770 Service Manual page 434

30 April, '89
Turn off the copier's main switch and undock the sorter from the
1.
copier.
CAUTION: During this procedure there will be three sets of springs removed. Do not
2. Remove the top cover (5 screws).
3.
Remove the manual feed cover [A]:
a) One shoulder screw [B]
b) Two pressure springs [C,D]
c) Two pressure plates [E,F] (2 E-rings)
d) Manual feed cover shaft [G]
4. Remove the top cover support bracket [H] (2 screws) and the 4 belt tension
springs [I,J,K,L].
mix up the sets; they are different.
9-30