Ricoh FT7770 Service Manual page 413

- Sort/Stack Mode -
When copies activate the copier exit sensor, the
turns on and starts turning the transport rollers.
turn gate solenoid turns on and moves the turn gate up to direct copies to
the sorter bins.
bin solenoid turns on and the bin gate drops down into the paper path to
direct the paper into the bin.
If a copy jams before entering the bin, the turn gate solenoid turns off,
and the following sheets are directed to the proof tray.
matically corrects the copy count displayed on the
only the number of copies in the bins.
- Manual Feed Mode -
The manual feed entrance can be used for job recovery; that is, it can be
used to feed in any sheets directed to the proof tray after a sorter jam.
It can also be used to feed inserts to the bins.
When paper is inserted in the manual feed entrance, the manual feed
sensor turns on.
drive clutch, and the appropriate bin solenoid all turn on.
the manual feed solenoid turns on to lower the manual feed stopper, and
allows inserted sheets to be fed to the appropriate bin.
When copies activate the timing sensor, the appropriate
The turn gate solenoid, the drive motor, the distribution
9-9
30
distribution drive clutch
At the same time. the
The copier auto-
operation panel to show
Shortly later,
April, '89