Ricoh FT7770 Service Manual page 452

30 April, '89
- Second Sorter Preparation -
Unpack the sorter, install all the bins according to the installation
1.
procedure contained in the sorter carton.
Replace the sorter main PCB [A] with the second sorter main PCB.
2.
[B] (4 connectors, 2 screws, 3 PCB mounting studs).
Loosen the four screws [C], then, install the left side sorter shield
3.
[D].
4. Connect the second sorter power supply cord [E] to the connector from
the sorter connector unit transformer, and fix the cord stopper [F] with
the cord bracket.
unit rear plate [H], stick the ground decal [I] beside it.
Secure the ground wire [G] to the sorter connector
10-12