Pick-Up Roller Replacement - Ricoh FT7770 Service Manual

30 April, '89

3. Pick-Up Roller Replacement

Removal -
-
1. Remove the feed-in unit. (Refer to "DF Removal.")
2. Remove the two bushings [A] from the front of the pick-up rollers [B] (1
E-ring each).
3. Remove the one-turn sensor [C] (1 screw).
4. Remove the 2 screws securing the separation roller support bracket and
slide it to the rear.
5. Unhook the tension spring [E], and remove the tensioner [F] (1 E-ring, 2
bushings).
(Do not lose the bushings
[G].)
7-40
[D]