Table of Contents
Advertisement
30 April, '89
11.
Insert the leveling shoes [A] under the sorter stapler feet [B], and
level the sorter stapler and align it with the copier by securing down
the feet.
12.
Install the fixing plate [C] (2 screws: M4 x 6 mm).
13.
Plug in the power supply cord, and turn on the copier main switch. The
staple unit raises to the home position, so open the right door
remove the styrofoam [E] from the base plate.
14.
Make 20 copies of two originals in staple mode, and confirm that the
a n d
[D]
Advertisement
Chapters
Table of Contents
