Table of Contents
Advertisement
17.
When docking the option tray [A] with the copier [B], make sure that
the docking pins [C] are firmly seated in the notches [D] of the copier.
18.
Install the interlock plate [E] (2 screws: M5 x 8mm).
19.
Place the leveling shoes [F] under the option tray leveling feet [G], and
screw down the feet to level the option tray.
20.
Pull the paper tray out halfway and install the docking stud [H].
21.
Open the left front door of the copier and stick on the misfeed removal
decal [I].
22.
Check the option tray operation.
23.
Complete the N.E.C.R.
8-17
30 April, '89
Advertisement
Chapters
Table of Contents
