Please Wait Condition - Ricoh FT7770 Service Manual

30 April, '89

Please Wait Condition

1) The Please Wait condition frequently
copy run, especially in the morning.
Check if the hot roller temperature is
Ready: 182°C
Fusing Lamp ON: 182°C
OFF: 185°C
Y N
Adjust temperature using SP 34.
Set SP 4-2.
If the problem
fluctuation of
Y N
Set SP 3-3 and the Weekly Timer so that the machine has
idled for 20 minutes prior to operation.
The use of constant voltage transformer may help.
is still not solved, then check if the voltage
the mains is greater than 10%.
occurs
within
13-34
after a continuous
specifications