Ricoh FT7770 Service Manual page 595

5. Remove the following parts from the sorter/stapler.
- Front bin bracket [A] (3 screws)
- Rear bin bracket [B] (3 screws)
- Base plate cover [C] (2 screws)
- Rear cover [D] (2 screws)
6. Remove the screw [E] securing the bottom bracket to the bin/jam sensor
board. If the stapler unit is located at the lower position, turn the knob at
the lower right side of the door to manually move the stapler unit to the
middle position.
14-7
1 August 1990