Electrical Component Descriptions - Ricoh FT7770 Service Manual

ELECTRICAL COMPONENT DESCRIPTION
Motors
Sorter Stapler (Ml)
Side Plate Drive (M2)
Staple Unit (M3)
Stapler (M4)
Gripper (M5)
Jog (M6)
Clutch
Distribution Drive (MC1)
Solenoids
Bin (SOL1 to 20)
Turn Gate (SOL21)
Gripper (SOL22)
Drives the rollers.
Drives the side plate side to side
according to the paper size. (dc stepper)
Drives the staple unit up or down to the
appropriate bin.
Feeds the staples and drives the stapler
hammer. (dc brush)
Drives the gripper forward into the bin
to grip the copies and bring them to the
stapling position.
Jogs (pivots) the side plate to align the
copy against the side plate of the bin.
(dc stepper)
Drives the rollers in the distribution
section.
Opens and closes the bin gate to direct
the copies into the appropriate bin.
Opens and closes the bin gate to direct
the copies into either proof tray or the
bins.
Opens and closes the bin gate to drive
the grippers to grip copies on the bins.
11-7
30
April, '89
(100 Vac)
(dc stepper)
(dc brush)