Ricoh FT7770 Service Manual page 393

30
April, '89
Open the top unit [ A ] , and remove the development unit cover [B] (1
10.
screw).
Position the paper conveyor unit [C] (2 positioning pins and 1 hook), and
11.
secure it (2 screws: M4 x 6mm).
Reinstall the development unit cover.
12.
13. Stick the cushion [D] on the front top of the power supply unit shielding
box.
Install the paper entrance guide [E] (2 screws: M4 x 6mm).
14.
Confirm that the paper conveyor unit opens and closes smoothly. Close
15.
the top unit.
16. Reinstall the lower rear cover and the lower left cover.
8-16