Duplex Side Plate Drive Wire Replacement - Ricoh FT7060 Field Service Manual

53. Duplex Side Plate Drive Wire Replacement

1. Remove the duplex tray.
2. Place the duplex unit upside down.
3. Remove the tension spring [A].
4. Remove the old drive wire [B].
5. Wrap the new wire around the drive pulley [C] 1.5 times as shown.
6. Insert the beads [D] of the drive wire in the duplex side plate bracket
[E].
7. Hook the tension spring to the eyelets of the drive wire.
(Refer to "Duplex Tray Removal.")
3-73
12 July '86