Check Customer Options; Check Link Status; Power Up Definity Audix System; Resolve Alarms - Avaya CMC1 Installation Manual

Task Table

Check Customer Options

1. Type display system-parameters customer-options and press
2. Ensure that the G3 version: field is V11.
3. If the customer was using Supplementary Services Protocol b or d on an
ISDN-PRI trunk group before the upgrade, go to screen 7, QSIG Optional
Features, and ensure that the Basic Call Setup field is y.

Check Link Status

1. Type display communication-interface links and press
2. Type status link number and press
3. Check that DS1 trunks and BRI phones are functioning normally.
4. Refer to Maintenance for Avaya DEFINITY Server CSI to test or restore the
out-of-service links.

Power Up DEFINITY AUDIX System

1. To power up the AUDIX assembly, refer to
Procedures'' on page

Resolve Alarms

1. Type display alarms and press
any alarms using Maintenance for Avaya DEFINITY Server CSI.

Restore Announcements (if necessary)

1. Type restore announcements and press
from the upgraded translation flashcard to memory, which takes about 40
minutes.

Check SPE

1. Type status system 1 and press

Install translation card

1. Replace the original translation card with the new ATA flashcard.
555-233-118
. Repeat this step for each link.
Enter
''DEFINITY AUDIX Power
3-24.
to examine the alarm log. Resolve
Enter
Enter
.
Enter
Issue 7 November 2003
.
Enter
.
Enter
to copy announcements
3-23